Step 1: Clear your data
Make sure to backup your files, programs, passwords and registration info before flashing the data.
To clear your data (including cache data, user data and all tablet data), you need to enter the recovery interface. There are 2 ways :
- With the Tabletoff, press the Volume Up button and Power button at the same moment.
- Enter the installed “system update” function -> restart to Recovery
In the recovery mode, you can use the Volume buttons to choose different options and enter with the Power button.
Choose ‘Clear data’ and confirm again. The data clearance is finished when you see the big green tick showed above.
Step 2: Download the file
You can find the Flash Tool here: MiPad3 Flash Tool
The latest version of the ROM file :
Install these two documents on your PC
With your Mipad 3 switched Off, push the Volume up button and the Power button at the same time. Connect your laptop or PC in Fastboot mode.
Step 3: Flashing the Firmware
- Decompress the flash tool and install it
- Decompress the ROM file
- Get MiGlash.exe starting
First load your tablet, then select the ROM file and after that start the booting process.
Wait until tablet reset automatically This means that things went well.And then you can go on setting up your tablet.
Step 4 Set up
Set up your Mipad 3 according to your preferences and start enjoying:)
Mipad 3 is available and you can see the full rundown on Mipad 3 specs here.
Don’t forget 20% off Coupon:116fec
Which expires at Aug.16th.